When backfilling Study guides, Class notes & Summaries

Nicet Highway Construction Level 2 Questions and Answers Already Passed What are the 5 types of bridge abutments? Closed Abutment, Stub or Perched Abutment, Pedestal or Spill-through Abutment, Integral End Bents, Mechanically Stabilized Abutment What is a "closed abutment"? A closed abutment is a full-height wall with wing walls on each side that retains the full height of the approach embankment. This type of abutment minimizes the required span length of the bridge. What is a stub or perche...

Progression: Construction Coordinator I - II Exam Answered Correctly. A chain trencher A return path sweep-and-alignment system is used to adjust which of the following? Anomalies, such as echoes and blind spots, can hide cable faults or cause a technician to misinterpret the signature of a time domain reflectometer (TDR) waveform. What causes an echo on a waveform TDR? As the RF signal travels on the coaxial cable, one portion of the signal may be attenuated more than the others. ...

more restrictive provisions apply correct answer: where conflicts occur between code and manufacture instructions. what shall be 3rd party certified as conforming to NSF 14 correct answer: all plastic pipe, fittings and components. all strainer plates on drain inlets shall be designed and installed so that all openings are..? correct answer: not greater than 1/2 inch (12.7) in least dimension. pipes through foundation walls need..? correct answer: a relieving arch or a pipe sleeve w...

Journeyman Plumbing Test Study Guide Questions and Answers Rated A+ more restrictive provisions apply where conflicts occur between code and manufacture instructions. what shall be 3rd party certified as conforming to NSF 14 all plastic pipe, fittings and components. all strainer plates on drain inlets shall be designed and installed so that all openings are..? not greater than 1/2 inch (12.7) in least dimension. pipes through foundation walls need..? a relieving arch or a pipe sleeve which i...

True or False: The credit union's BSA Officer is ultimately responsible for the credit union's BSA compliance. - Correct answer-False. Although the BSA Officer is responsible for coordinating and monitoring day-to-day BSA/AML compliance and managing all aspects of the BSA compliance program, the credit union's board of directors is ultimately responsible for the credit union's compliance. This is why it is critical that the board of directors designate a qualified BSA officer and rece...

2a Hoisting license latest version graded A+ What is the purpose of the swing gear on an excavator It connects the car body to the tracks Who is responisble for inspecting a trench before anyone goes in it The equipment operator What is the prefered sling angle 60* The top of the spoil pile is called The crown A four footbdeep trench requires an additional ladder for each _ of open trench 25ft Materials mist be kept back from the edge of the trenxh a minimum of Two feet W...

Mass Hoisting Test Questions and Answers Already Passed What is the purpose of the swing gear on an excavator It connects the car body to the tracks Who is responsible for inspecting a trench before anyone goes in it The equipment operator What is the preferred sling angle of these angles? 60 degrees 45 degrees 30 degrees 60 degrees The top of the spoil pile is called Crown A four foot deep trench requires an additional ladder for every _______of open trench 25 feet Mate...

when installing a steel tank which has zinc anodes welded directly onto the tank for cathodic protection you should - correct answers remove the plastic wrapping around the anodes prior to installation if local authorities and tank manufacturers permit a sand slurry mixture to be used for backfilling a tank what steps should be taken to ensure that use of the slurry is proper? - correct answers use only Personnel trained in the sand slurry method by the tank manufacturer and use the method...

API 1169 Study Test Questions Test RM 3 Latest Update Graded A+ One main category variable of pressure test planning that an operator must consider is the _________________. purpose Field beveling of pipe ends by manual oxygen cutting is acceptable if authorized by the company. True Location of casings cathode protection external anodes, and utility crossings should all be recorded on the. as-built drawings Releasing air or water pressure through valves, at a test head, after t...

After backfilling the vapor return and vent lines, the maximum pressure drop through the system shall not exceed ________at 60 cubic feet per hour as determined by TP-201.4, Dynamic Backpressure. a. 0.75 inches WC b. 0.5 inches WC c. 0.32 inches WC d. 0.55 inches WC correct answers c. 0.5 inches WC CARB's most recent vapor recovery regulations are known as: a. EVR (enhanced vapor recovery) b. CVR (California vapor recovery) c. PVR (protective vapor recovery) d. ORVR (onboard refu...