Ase a5 Study guides, Class notes & Summaries

ASE A5 EXAM LATEST 2023-2024 ACTUAL EXAM QUESTIONS AND CORRECT ANSWERS WITH RATIONALES(VERIFIED ANSWERS) |AGRADE

ASE A5 Brakes Test | Questions with 100% Correct Answers | Latest Update 2024 | Verified

ASE A5 Practice Test - ASE A5 Brakes Test Prep - Test Prep 2 Quizzes & Ans 2024!!

ASE A5 Brakes Automotive Certification Test Questions and Answers The brakes are being bled on an older vehicle equipped with a quick take up valve in the master cylinder. Technician A says the quick take up valve must be depressed. Technician B says the brakes on this vehicle cannot be bled. Who is right? a. A only b. B only c. Both A and B d. Neither A nor B Both technicians are wrong. The brakes on quick take up systems use the same bleeding procedure as those without this valve. ...

ASE A5 Brakes Final Exam Questions and Answers 2024.

1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - Answer 1. The correct answer is C. The metering valve delays the flow of brake fluid to the front calipers until the pressure in the system rises to a point where the wheel cylinder can overcome the tension of the brake shoe return springs. The purpose ...

ASE A5 Brakes Exam Questions and Correct Answers On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. Proportioning valve B. Pressure safety switch C. Metering valve D. Residual check valve - The correct answer is C. The metering valve delays the flow of brake fluid to the front calipers until the pressure in the system rises to a point where the wheel cylinder can overcome the tension o...

ASE A5 ACTUAL EXAM (PRACTICE TEST) (BRAKES) EXAM QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED A+

ASE A5 Practice Test (Brakes) A spongy brake pedal may be caused by: a. ABS Diagnostic Trouble Code set b. Frozen caliper piston c. Defective metering valve. d. Air in hydraulic system - D This question is not like the others. It has the word EXCEPT. For this question, look for the choice that could NOT cause the described situation. Read the entire question carefully before choosing your answer. A vehicle has a very erratic brake pulling concern while applying the brakes. All of th...

ASE A5 Practice Test Brakes Exam A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Answer ️️ -TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clicking noise during t...